Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 

Installation and Upgrade

Installation Instructions

A full-version installer is available for Release 3.3. You must use this installer for a production environment. You can also use it to install a trial environment if you want to customize the installation settings.

After copying the installer tar file to the CSO server and expanding the file, you provision the VMs, and run a script to create a file of settings for the installation. You then run the installer, which takes approximately an hour to install CSO. Finally, you start the CSO infrastructure services and microservices.

Note: From Cloud CPE Solution Release 3.1.1 onward, you do not need Internet access from the CSO server to install CSO.

For more information, follow the instructions in the Deployment Guide or the README file that is included with the software installation package.

Upgrade Instructions

Configuring Name Servers on CPE Devices

To configure the name server on a CPE device, you must use the custom properties to provide the name server details when you are adding a tenant.

Software Installation Requirements for NFX250 Network Services Platform

The NFX250 requires the Junos OS Release 15.1X53-D47 for the Cloud CPE Solution Release 3.3.

When you set up a distributed deployment with a NFX250 device, you must use Administration Portal or the API to:

  1. Upload the image to Contrail Service Orchestration.
  2. Specify this image as the boot image when you configure activation data.

For more information, refer to https://www.juniper.net/documentation/en_US/release-independent/junos/information-products/pathway-pages/nfx-series/product/ .

Software Downloads for SRX Series Devices

The Contrail Service Orchestration (CSO) software package does not contain the images for the SRX1500, SRX4100, and SRX4200 devices. You can download these images by using the following links:

Modified: 2018-03-26