Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Installing and Setting Up CPE devices
Preparing for CPE Device Activation
Before customers can activate a CPE devices, you must complete the following tasks:
- Specify activation data with Administration Portal or
the API for each CPE device, such as:
- The name of the site for the device
- The serial number
- The activation code (NFX250 devices only)
- Send activation codes for NFX250 devices to customers.
Installing and Configuring an NFX250 Device
An administrator at the customer’s site installs the NFX250 and performs the initial software configuration for the NFX250. These are straightforward tasks that involve a limited amount of hardware installation, cabling, and software configuration. See the NFX Series documentation for more information.
When the administrator completes the initial configuration process, the NFX 250 device obtains a boot image and configuration image from its regional server and becomes operational.
Installing and Configuring an SRX Series Services Gateway or vSRX Instance as a CPE Device
An administrator at the customer’s site installs and configures an SRX Series Services Gateway or a vSRX instances asa CPE device using the following workflow:
- Install the hardware and cable the device.
- Power on the device and access the device console.
- Log in to Customer Portal and perform the following tasks:
- Add the site to the network.
- Apply the initial configuration to the device.
- Activate the CPE device.
