TechLibrary

[+] Expand All

[-] Collapse All

Download This Guide

This section lists the errata and changes in the Cloud CPE Solution Release 3.1.1 documentation:

On the Connectivity Requirements tab of the Add On-Premise Site page (Sites > Site Management > Add > On-Premise Site ), the help for the Type field indicates that you can select the type of WAN link. However, this field only displays the link type of the WAN link (MPLS or Internet), which is specified in the device profile, and cannot be modified.
Configuring devices from the POPs landing page—From Cloud CPE Solution Release 3.1 onward, you can configure devices from the POPs page as follows:
1. Select Resources > POPs > Pop-Name.
  The Pop-Name page appears.
2. Click the Routers tab.
3. Select the device that you want to configure and click the Configure Device button.
  The Stage 2 Config page appears. This page is dynamically rendered based on stage-2 configuration specified in the device profile.
4. Enter the configuration data on the page.
5. Click Save to save the configuration.
  A confirmation message is displayed and the deployment status changes to pending deployment.
6. Click Deploy to save and deploy the configuration.
  A confirmation message is displayed indicating that the job is created and subsequently that the job was successful. You can click Deploy History to view the job logs.
7. Click Cancel to go back to the Pop-Name page.