Download This Guide
Installation
- Installation Instructions
- Configuring Name Servers on CPE Devices
- Software Installation Requirements for NFX250 Network Services Platform
- Software Downloads for SRX Series Devices
Installation Instructions
Two CSO installers are available for Release 3.1:
- A plug-and play-installer for a demo environment—This installer offers a snapshot version of CSO that you can install in a few minutes by copying the installer tar file to the CSO server, expanding the tar file, and running the installer. The installation settings, such as the VM resources, are fixed and you cannot modify them.
- A full-version installer—You
must use this installer for a production environment and you can use
it for install a demo environment if you want to customize the installation
settings.
After copying the installer tar file to the CSO server and expanding the file, you provision the VMs, and run a script to create a file of settings for the installation. You then run the installer, which takes approximately an hour to install CSO. Finally, you start the CSO infrastructure services and microservices.
![]() | Note: From Cloud CPE Solution Release 3.1 onward, you do not need Internet access from the CSO server to install CSO. |
For more information, follow the instructions in the Deployment Guide or the README file that is included with the software installation package.
Configuring Name Servers on CPE Devices
To configure the name server on a CPE device, you must use the custom properties to provide the name server details when you are adding a tenant.
Software Installation Requirements for NFX250 Network Services Platform
The NFX250 requires the Junos OS Release 15.1X53-D47 for the Cloud CPE Solution 3.1.
When you set up a distributed deployment with a NFX250 device, you must use Administration Portal or the API to:
- Upload the image to Contrail Service Orchestration.
- Specify this image as the boot image when you configure activation data.
For more information, refer to https://www.juniper.net/documentation/en_US/release-independent/junos/information-products/pathway-pages/nfx-series/product/ .
Software Downloads for SRX Series Devices
The Contrail Service Orchestration (CSO) software package does not contain the images for the SRX1500, SRX4100, and SRX4200 devices. You can download these images by using the following links:
- SRX1500: https://webdownload.juniper.net/swdl/dl/secure/site/1/record/69369.html
- SRX1500 USB: https://webdownload.juniper.net/swdl/dl/secure/site/1/record/69372.html
- SRX1500 Preboot Execution Environment (PXE): https://webdownload.juniper.net/swdl/dl/secure/site/1/record/69374.html
- SRX4100 and SRX4200: https://webdownload.juniper.net/swdl/dl/secure/site/1/record/69370.html
- SRX4100 and SRX4200 USB: https://webdownload.juniper.net/swdl/dl/secure/site/1/record/69373.html
- SRX4100 and SRX4200 PXE: https://webdownload.juniper.net/swdl/dl/secure/site/1/record/69375.html