Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 


Installation Notes

You must use the CSO installer for a production environment or a demo environment. After copying the installer TAR file to the CSO server and expanding the file, you provision the virtual machines (VMs), and run a script to create a file of settings for the installation. You then run the installer, which takes approximately one hour to install CSO. Finally, you start the CSO infrastructure services and microservices.

Note: If you use the script to spawn the VMs on the physical servers (host OS), then the physical servers must be connected to the Internet to download certain software packages. After the VMs are spawned, you can proceed with the installation without Internet access.

For more information, follow the instructions in the Deployment Guide or the README file that is included with the software installation package.

Note: If the information in the README file differs from the information in the technical documentation (Deployment Guide or Release Notes), follow the information in the technical documentation.

Configuring Name Servers on CPE Devices

To configure the name server on a CPE device, you must use the custom properties to provide the name server details when you are adding a tenant.

Software Installation Requirements for NFX250 Network Services Platform

The NFX250 requires the Junos OS Release 15.1X53-D47 for the Cloud CPE Solution Release 3.1.4.

When you set up a distributed deployment with a NFX250 device, you must use Administration Portal or the API to:

  1. Upload the image to Contrail Service Orchestration.
  2. Specify this image as the boot image when you configure activation data.

For more information, refer to .

Software Downloads for SRX Series Devices

The Contrail Service Orchestration (CSO) software package does not contain the images for the SRX300 Series, SRX1500, SRX4100, and SRX4200 devices. You can download these images by using the following links:

Supported Software

For information about the software versions qualified for CSO Release 3.1.4:

  • For the centralized deployment, see Table 5.
  • For the distributed deployment, see Table 7.

Modified: 2018-02-28