Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Setting Up a Centralized Deployment
After you have installed the Cloud CPE solution and published network services with Network Service Designer, you use Administration Portal to set up a centralized deployment. The following workflow describes the process.
- Create the POPs and associated resources.
- You must create a VIM for each POP.
- You can add an MX Series router as a physical network element (PNE) to provide a Layer 3 routing service to customer sites through use of virtual routing and forwarding (VRF) instances.
- You add the Junos Space element management system (EMS) if you use a VNF that requires this EMS.
- Create customers and their sites.
You can create two types of sites:
- Branch sites—Configure each branch site in the customer’s network.
- Data Center—Configure one data center for the customer only if users access the Internet through the corporate VPN .
- If you configured a PNE, then associate the PNE with the site and configure a VRF for each customer site.
- Allocate network services to customers.
For detailed information about using Administration Portal, see the Contrail Service Orchestration User Guide.
