Radio Status Monitor
The Radio Status monitor, on the Equipment tab in Monitor mode, provides information about the radios and access points being controlled at this node. For example if you select Wireless Network, information about all of the radios is displayed; if you select a wireless controller, then only information for the radios for that controller is shown. The monitor has a summary view and a detailed view. The default view is the summary, showing four of the six available fields. These fields in the Radio Status monitor are described in Table 1.
Table 1: Radio Status Monitor Fields
Field | Description | Summary, Detailed, or Hidden View |
|---|---|---|
Radio Identifier | The system identification for the radio, composed of:
| Summary |
MAC Address | The radio MAC address. | Summary (Hidden) |
Status | Up (enabled), Down (disabled), or NA (unable to determine status). | Summary |
Radio Type | The type of wireless clients that can connect to the access point. | Summary |
Channel | The configured operating channel for AP communication. | Summary |
Tx Power | The transmit power level for a radio. | Summary (Hidden) |
