This menu is available only for SRX300 lines of devices and SRX550M device.
You are here: Network > Connectivity > PPPoE.
PPPoE connects multiple hosts on an Ethernet LAN to a remote site through a single customer premises equipment (CPE) device (Juniper Networks device).
Use the configure PPPoE tasks to configure the PPPoE connection. The PPPoE wizard guides you to set up a PPPoE client over the Ethernet connection.
On all branch SRX Series devices, the PPPoE wizard has the following limitations:
While you use the load and save functionality, the port details are not saved in the client file.
The Non Wizard connection option cannot be edited or deleted through the wizard. Use the CLI to edit or delete the connections.
The PPPoE wizard cannot be launched if the backend file is corrupted.
The PPPoE wizard cannot be loaded from the client file if non-wizard connections share the same units.
The PPPoE wizard cannot load the saved file from one platform to another platform.
There is no backward compatibility between PPPoE wizard Phase 2 to PPPoE wizard Phase 1. As a result, the PPPoE connection from Phase 2 will not be shown in Phase 1 when you downgrade to an earlier release.