You are here: VPN > Dynamic VPN.
To add global settings:
- Click Global Settings on the upper right side
of the Resource Profiles page.
The DVPN - Global Settings page appears.
- Complete the configuration according to the guidelines provided in Table 1.
- Click OK to save the changes. If you want to discard your changes, click Cancel.
Table 1: Fields on the Global Settings page
Select an access profile from the list to use for Extended Authentication for remote users trying to download the Access Manager.
|Address Profile Settings|
Select an address pool from the list
Click + to add a new address pool.
The New Address Pool page appears.
|New Address Pool|
Enter a name for address pool.
Enter the network prefix for the address pool for IPv4 or IPv6 addresses.
Click + to add the address range for DVPN.
Address Range Name
Enter an address range name.
Enter the lower boundary for the IPv4 or IPv6 address range.
Enter the upper boundary for the IPv4 or IPv6 address range.
Click X to delete the address ranges of DVPN.
Primary DNS Sever
Enter the primary DNS IP address.
Secondary DNS Sever
Enter the secondary DNS IP address.
Primary WINS Sever
Enter the primary WINS IP address.
Secondary WINS Sever
Enter the secondary WINS IP address.