About the Cluster Configuration Page
You are here: Device Administration > Cluster Configuration.
Use this page to add, edit, or delete chassis cluster configuration.
Tasks You Can Perform
You can perform the following tasks from this page:
Edit Node settings. See Edit Node Settings.
Add an HA cluster interface. See Add an HA Cluster Interface.
Edit an HA cluster interface. See Edit an HA Cluster Interface.
Delete HA cluster interface. See Delete HA Cluster Interface.
Add a redundancy group. See Add a Redundancy Group.
Edit a redundancy group. See Edit a Redundancy Group.
Delete redundancy group. See Delete Redundancy Group.
Table 1: Fields on the Node Settings Page
Displays the node ID.
Displays the cluster ID configured for the node.
Displays the name of the node.
Displays the IP address used while booting.
Displays the management interface of the node.
Displays the management IP address of the node.
Displays the state of the redundancy group.
Table 2: Fields on the HA Cluster Settings Page
To configure the global settings:
Displays the physical interface name.
Member Interfaces/IP Address
Displays the member interface name or IP address configured for an interface.
Displays the redundancy group.
Displays the redundancy group identification number.
Displays the selected Preempt option.
Gratuitous ARP Count
Displays the number of gratuitous ARP requests that a newly elected primary device in a chassis cluster sends out to announce its presence to the other network devices.
Displays the assigned priority for the redundancy group on that node. The eligible node with the highest priority is elected as primary for the redundant group.