Add a Static Route
You are here: Network > Routing > Static Routing.
To add a static route:
- Click the add icon (+) on the upper right side
of the Static Routing page.
The Add Static Route page appears.
- Complete the configuration according to the guidelines provided in Table 1.
- Click OK to save the changes. If you want to
discard your changes, click Cancel instead.
If you click OK, a new static route is added with the provided configuration.
Table 1: Fields on the Add Static Route Page
Field | Description |
---|---|
Routing Instance | Select the routing instance from the list. The selected destination routing instance that points to the routing table containing the tunnel destination address. Note: If you log in as a tenant user, routing instance is not displayed as tenant context supports only one routing instance. |
IPv4 | Click the IPv4 button. |
IP address | Enter the static route IPv4 address. |
Subnet mask | Enter the subnet mask. For example, 24 bits represents the 255.255.255.0 address. |
IPv6 | Click the IPv6 button. |
IPv6 address | Enter the static route IPv6 address. |
Prefix | Enter the prefix for IPv6 address. |
Next-hop | Displays the next-hop address created. Click any one of the following
|