Add a Proxy ARP
You are here: Network > NAT > Proxy ARP/ND.
To add a proxy ARP:
- Click the add icon (+) on the upper right side
of the proxy ARP/ND page.
Select the Proxy ARP page. The Add Proxy ARP page appears.
- Complete the configuration according to the guidelines provided in Table 1.
- Click OK to save the changes. If you want to discard your changes, click Cancel.
Table 1: Fields on the Add Proxy ARP Page
Field | Action |
---|---|
Interface | Enter the interface type. Select an option:
|
Addresses | Dislays the proxy ARP IP address. Click Delete to deleted the proxy ARP address. |
IPv4 Address/Range | Enter the source IP address range and the end IP address that the device can be assigned to. Click + to add to the addresses. |