Add a Destination NAT Pool
You are here: Network > NAT > Pools.
To add a destination NAT pool:
- Click Create > Destination NAT Pool on the upper right side of the Pools page.
The Create Destination NAT Pool page appears.
- Complete the configuration according to the guidelines provided in Table 1.
- Click OK to save the changes. If you want to discard your changes, click Cancel.
Table 1 describes the fields on the Create Destination NAT Pool page.
Table 1: Fields on the Create Destination NAT Pool Page
Field | Action |
---|---|
Name | Enter the destination pool name. |
Description | Enter a description for the destination pool. |
Routing instance | Select a routing instance from the list. |
Pool address type | Select one of the following pool address type:
|
Pool address | Enter IPv4 or IPv6 address for destination pool. Note: This option is available only when you select Address & Port as pool address type. |
Pool port | Enter a destination port value. Range: 0 through 65535. Note: This option is available only when you select Address & Port as pool address type. |
Start address | Enter starting address (IPv4 or IPv6) of the destination address range. Note: This option is available only when you select Address Range as pool address type. |
End address | Enter ending address (IPv4 or IPv6) of the destination address range. Note: This option is available only when you select Address Range as pool address type. |