Link Aggregation Global Settings
You are here: Network > Connectivity > Link Aggregation.
To add link aggregation global settings:
- Complete the configuration according to the guidelines provided in Table 1.
Table 1: Fields on the Link Aggregation Global Settings page
Field | Action |
---|---|
Global Settings | |
Device Count | Enter the device count. The range is 1 through 28. |
Advanced Settings Note: This option is not available for SRX5000 line of devices. | |
LACP Configuration | Specifies global Link Aggregation Control Protocol configuration. |
System Priority | Click the arrow button to select the priority level that you want to associate with the LAG. |
Link Protection | Select the option to protect the link. Note: You can configure only two member links for an aggregated Ethernet interface, that is, one active and one standby. |
Non-Revertive | Enable or disable the option to not to choose even if a higher priority link is available. |