Global Settings
You are here: VPN > Dynamic VPN.
To add global settings:
- Click Global Settings on the upper right side
of the Resource Profiles page.
The DVPN - Global Settings page appears.
- Complete the configuration according to the guidelines provided in Table 1.
- Click OK to save the changes. If you want to discard your changes, click Cancel.
Table 1: Fields on the Global Settings page
Field | Action |
---|---|
Access Profile | Select an access profile from the list to use for Extended Authentication for remote users trying to download the Access Manager. |
Address Profile Settings | |
Address Pool | Select an address pool from the list |
+ | Click + to add a new address pool. The New Address Pool page appears. |
New Address Pool | |
Name | Enter a name for address pool. |
Network Address | Enter the network prefix for the address pool for IPv4 or IPv6 addresses. |
Address Ranges | |
+ | Click + to add the address range for DVPN. |
Address Range Name | Enter an address range name. |
Lower Limit | Enter the lower boundary for the IPv4 or IPv6 address range. |
High Limit | Enter the upper boundary for the IPv4 or IPv6 address range. |
X | Click X to delete the address ranges of DVPN. |
XAUTH Attributes | |
Primary DNS Sever | Enter the primary DNS IP address. |
Secondary DNS Sever | Enter the secondary DNS IP address. |
Primary WINS Sever | Enter the primary WINS IP address. |
Secondary WINS Sever | Enter the secondary WINS IP address. |