Add an HA Cluster Interface
You are here: Device Administration > Cluster Configuration.
To add an HA cluster interface:
- Click + on the upper right side of the Cluster
Configuration page.
The Add HA Cluster Interface page appears.
- Complete the configuration according to the guidelines provided in Table 1.
- Click OK to save the changes. If you want to discard your changes, click Cancel.
Table 1: Fields on the Add HA Cluster Interface Page
Field | Action |
---|---|
Fabric Link | |
Fabric Link 0 (fab0) | |
Interface | Enter the interface IP address for fabric link 0 and click + to add it. Select an existing interface and click X to delete the interface. |
Fabric Link 1 (fab1) | |
Interface | Enter the interface IP address for fabric link 1 and click + to add it. Select an existing interface and click X to delete the interface. |
Redundant Ethernet | |
Interface | Enter the logical interface. This specifies a logical interface consisting of two physical Ethernet interfaces, one on each chassis. |
IP | Enter redundant Ethernet IP address. |
Redundancy Group | Select one of the redundancy group from the list. Else, enter a redundancy group. |
lacp | Select an option from list:
|
periodic | Select an option from list for periodic transmission of LACP packets. The options are fast or slow. |
+ | Click + to add the redundant Ethernet configuration. |
X | Select one or more existing redundant Ethernet configurations and click X to delete it. |