Add a Scheduler
You are here: Network > Class of Service(CoS) > Schedulers.
- Click the add icon (+) available on the right
side of the Scheduler page.
The Add Scheduler page appears.
- Complete the configuration according to the guidelines
provided in Table 1.
- Click OK to save the changes. If you want to
discard your changes, click Cancel.
Table 1: Fields on
the Add Scheduler Page
Field | Action |
---|
Scheduler name | Enter the scheduler name. |
Scheduler priority | Select an option from the list: high—Packets in this queue have high
priority. low—Packets in this queue are transmitted
last. medium-low—Packets in this queue have
medium-low priority. medium-high—Packets in this queue have
medium-high priority. strict-high—Packets in this queue are
transmitted first.
|
Buffer size | Select an option from the list: exact—Exact buffer size. percent—Percentage of the total buffer.
Select and type an integer from 1 through 100. remainder—Remaining available buffer
size. temporal—Temporal value in microseconds.
|
Shaping rate | Enter the minimum bandwidth allocated to a queue. Select an option from the list: rate—Shaping rate as an absolute number
of bits per second. Select and type an integer from 3200 through 160,000,000,000
bits per second. percent—Shaping rate as a percentage.
Select and type an integer from 0 through 100.
|
Transmit rate | Enter the transmission rate of a scheduler. Select an option from the list: rate—Transmit rate. Select and type an
integer from 3200 through 160,000,000,000 bits per second. exact—Exact transmit rate. percent—Percentage of transmission capacity.
Select and type an integer from 1 through 100. remainder—Remaining transmission capacity.
|