Edit Node Settings
You are here: Device Administration > Cluster Configuration.
To edit node settings:
- Select a node setting that you want to edit on the Cluster Configuration page.
- Click the pencil icon available on the upper right side
of the page.
The Edit Node Settings page appears with editable fields.
Table 1: Fields on the Edit Node Settings Page
Enter the name of the host.
Enter the backup router address to be used during failover.
Enter the destination IP address.
Click + to add the destination IP address or select an existing IP address and click X to delete it.
Select an interface available for the router from the list.
Note: You can add and edit two interfaces for each fabric link.
Enter the interface IP address.
Click + to add the interface.
Select one or more existing interfaces and click X to delete it.