Add an Address Pool
You are here: Security Services > Firewall Authentication > Address Pools.
To add an address pool:
- Click the add icon (+) on the upper right side
of the Address Pools page.
The Create Address Pool page appears.
- Complete the configuration according to the guidelines provided in Table 1.
- Click OK to save the changes. If you want to discard your changes, click Cancel.
Table 1: Fields on the Create Address Pool Page
Field | Description |
---|---|
General | |
Pool Name | Enter the address pool name. |
Network Address | Enter an IPv4 address for the address pool. |
XAUTH Attributes | |
Primary DNS Server | Enter the primary-dns IPv4 address. |
Secondary DNS Server | Enter the secondary-dns IPv4 address. |
Primary WINS Server | Enter the primary-wins IPv4 address. |
Secondary WINS Server | Enter the secondary-wins IPv4 address. |
Address Ranges | |
Add | Click + to add a new address range for the address pool. |
Name | Enter a name for the IP address range. |
Lower Limit | Enter the lower limit of the address range. |
High Limit | Enter the upper limit of the address range. |
Delete | Click the delete icon to delete the address range for the address pool. |