About the UAC Settings Page
You are here: Security Services > Firewall Authentication > UAC Settings.
Use this page to configure UAC Settings.
Field Description
To configure UAC settings:
- Complete the configuration according to the guidelines provided in Table 1.
- Click Save to save the changes.
Table 1 describes the fields on the UAC Setting page.
Table 1: Fields on the UAC Setting Page
Field | Description |
---|---|
Global Settings | |
Certificate Verification | Determines whether server certificate verification is required when initiating a connection between a device and an Access Control Service in a UAC configuration. Select the following options from the list:
|
Interval | Specifies the value in seconds that the device should expect to receive a heartbeat signal from the IC Series device. Enter the heartbeat interval in seconds. Range: 1 through 9999. |
Test Only Mode | Allows all traffic and log enforcement result. Enable the Test Only Mode option. |
Timeout | Specifies (in seconds) that the device should wait to get a heartbeat response from an IC Series UAC Appliance. Enter the timeout in seconds. Range: 2 through 10000. |
Timeout Action | Specifies the action to be performed when a timeout occurs and the device cannot connect to an Infranet Enforcer. Select the timeout action from the list. |
Infranet Controller | |
Infranet Controller | Click + to add an infranet controller. Click pencil icon to edit a selected infranet controller. Click delete icon to delete the selected infranet controller. |
Name | Enter a name for the Infranet Controller. |
IP address | Enter an IP address for the Infranet Controller. |
Interface | Select an interface used for the Infranet Controller. |
Interface | Enter the password to use for the Infranet Controller |
CA Profiles | Select a CA from the list in the CA Profiles column and then click the right arrow to move them to the Selected column. Note: To deselect a CA, select the CA in the Selected column and then click the left arrow to move them to the CA Profiles column. |
Port | Specifies the port number to be associated with this Infranet Controller for data traffic. Enter a value from 1 through 65,535. |
Server Certificate Subject | Enter the server certificate subject name of the Infranet Controller certificate to match. |
Captive Portal | |
Captive Portal | Specifies the preconfigured security policy for captive portal on the Junos OS Enforcer. Click + to add a captive portal. Click pencil icon to edit a selected captive portal. Click delete icon to delete the selected captive portal. |
Name | Enter a name for the captive portal. |
Redirect Traffic | Select a traffic type to be redirected. |
Redirect URL | Enter the URL to which the captive portal should be directed. |