About the Link Aggregation Page

You are here: Network > Connectivity > Link Aggregation.

Use this page to view, add, and remove link aggregation configuration details.

Tasks You Can Perform

You can perform the following tasks from this page:

Global Settings. See Link Aggregation Global Settings.
Add Logical Interface. See Add a Logical Interface to Link Aggregation.
Enable/Disable LACP link-protection. To do this, select a link aggregation and click Enable/Disable available at the upper right side of the Link Aggregation table.
Add Link Aggregation. See Add a Link Aggregation.
Edit Link Aggregation. See Edit an Aggregated Interface.
Delete Link Aggregation. See Delete Link Aggregation.
Search for text in a link aggregation table. See Search for Text in the Link Aggregation Table.
Show or hide columns in the Link Aggregation table. To do this, use the Show Hide Columns icon in the top right corner of the page and select the options you want to show or deselect to hide options on the page.

Table 1 describes the fields on the Link Aggregation page.

Table 1: Fields on the Link Aggregation Page

Field	Description
Name	Displays the name of the select LAG.
Link Status	Displays whether the interface is linked (Up) or not linked (Down).
Admin Status	Displays whether the interface is up or down.
Interfaces	Displays the name of the aggregated interface.
VLAN ID	Displays the Virtual LAN identifier value for IEEE 802.1Q VLAN tags (0.4094).
IP Address	Displays the IP address associated with the interface.
VLAN Tagging	Displays whether the interface is VLAN-tagged (enabled) or untagged (disabled).
Enabled/Disabled	Displays whether the LACP link-protection is enabled or disabled.
Description	Provides a description of the LAG.