About the Dynamic VPN Page
You are here: VPN > Dynamic VPN.
You can view and add, edit, or delete dynamic VPN global configuration options.
This menu is available only for SRX300 line of devices and SRX550M devices.
Tasks You Can Perform
You can perform the following tasks from this page:
Configure global settings. See Global Settings.
Add DVPN IPsec template. See IPsec Template.
Add a dynamic VPN. See Add a Dynamic VPN.
Edit a dynamic VPN. See Edit a Dynamic VPN.
Delete dynamic VPN. See Delete Dynamic VPN.
Launch VPN wizard. To do this, click Launch Wizard available on the upper right corner of the Dynamic VPN table. Follow the guided steps to configure the VPN wizard.
Table 1 describes the fields on the Dynamic VPN page.
Table 1: Fields on the Dynamic VPN Page
Select a previously created access profile from the list displayed in Global Settings.
Specify the access profile to use for Extended Authentication for remote users trying to download the Access Manager.
Create a client configuration for the dynamic VPN feature.
Enter a name for dynamic VPN.
Enter an username. Specifies the list of users who can use this client configuration.
Enter an IP address and netmask for the users.
Select a previously configured IKE AutoKey configuration from the list.
Remote Protected Resources
Enter an IP address and netmask of a resource behind the firewall. Traffic to the specified resource will go through the VPN tunnel and therefore will be protected by the firewall’s security policies.