About the Destination Page
You are here: Network > NAT > Destination.
Use this page to add, edit, or delete destination NAT configurations.
Tasks You Can Perform
You can perform the following tasks from this page:
Add a Destination Rule Set. See Add a Destination Rule Set.
Edit a Destination Rule Set. See Edit a Destination Rule Set.
Delete a Destination Rule Set. See Delete Destination Rule Set.
Field Descriptions
Table 1 describes the fields on the Destination Page.
Table 1: Fields on the Destination Page.
Field | Description |
---|---|
Destination NAT Rule Set | |
From | Displays the destination NAT sort options from which the packets flow. The options available are:
|
Filter | Displays the filter option. |
Name | Displays the name of the destination NAT rule set. |
From | Displays the name of the routing instance/zone/interface from which the packets flow. |
Rule | Displays the name of the rule in the selected destination NAT rule set. |
Description | Displays a description of the destination NAT rule set. |
Rules in Selected Rule-Set | |
Rule Name | Displays the name of the rule in the selected destination NAT rule set. |
Match Source | Displays the match source address. |
Match Destination | Displays the match destination address. |
Match IP Protocol | Displays the match IP protocol. |
Match Destination Port | Displays the match destination port. |
Action | Displays the action of the rule in the selected rule set. |
Upper Threshold | Displays upper threshold at which an SNMP trap is triggered. |
Lower Threshold | Displays lower threshold at which an SNMP trap is triggered. |
Description | Displays a description of the rule in the selected destination NAT rule set. |