Create an Access Point Radio Settings
You are here: Network > Connectivity > Wireless LAN > Settings.
To create an access point radio setting:
- Click the add icon (+) on the upper right side
of the Radio Settings table.
The Create Access Point Radio Settings page appears.
- Complete the configuration according to the guidelines provided in Table 1.
- Click OK to save the changes.
The access point radio settings are created.
If you want to discard your changes, click Cancel.
Table 1: Fields on the Create Access Point Radio Settings Page
Select a radio type from the list.
Select the radio state to enable.
Virtual Access Points
To add a virtual access point:
Select the virtual access point and click Edit or Delete icons to edit or remove it.
|Radio Settings—Radio Options|
Select a radio mode option from the list.
Select a channel number for radio from the list.
Select a channel bandwidth for radio from the list.
Enter a value for radio transmit power using up or down arrows.