Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Enroll Your Device with Juniper ATP Cloud

 

You are here: Device Administration > ATP Management > Enrollment.

Use this page to enroll your SRX device with Juniper Advanced Threat Prevention (ATP) Cloud.

Juniper ATP Cloud is a cloud-based threat identification and prevention solution. It protects your device from malware and sophisticated cyber threats by inspecting e-mail and web traffic for advanced threats. Juniper ATP Cloud integrates with the SRX Series devices to simplify its deployment and enhance the anti-threat capabilities of the SRX device.

Before enrolling a device:

  • Ensure that you have a Juniper ATP Cloud account with an associated license (free, basic, or premium) to configure a Juniper ATP Cloud realm. The license controls the features of the Juniper ATP Cloud. For more information on the Juniper ATP Cloud account, see Registering a Juniper Sky Advanced Threat Prevention Account.

  • Decide which region the realm you create will cover because you must select a region when you configure a realm.

  • Ensure the device is registered in the Juniper ATP Cloud cloud portal.

  • In the CLI mode, configure set security forwarding-process enhanced-services-mode on your SRX300, SRX320, SRX340, SRX345, and SRX550M devices to open ports and get the device ready to communicate with Juniper ATP Cloud.

To enroll your device to Juniper ATP Cloud using J-Web:

  • Optional. Configure proxy profile.

  • Enroll SRX device with Juniper ATP Cloud.

To enroll your device to Juniper ATP Cloud using J-Web:

  1. Use either of the following methods to configure the proxy profile:
    1. Select an option in the Proxy Profile list and proceed with Step 2.

      Note
      • The list displays the existing proxy profiles that you have created using the Proxy Profile page (Security Policies & Objects > Proxy Profiles).

      • The SRX device and Juniper ATP Cloud communicates through the proxy server if a proxy profile is configured. Otherwise, they directly communicate with each other.

    2. Click Create Proxy to create a proxy profile.

      The Create Proxy Profile page appears.

      1. Complete the configuration by using the guidelines in Table 1.

      2. Click OK.

        A new proxy profile is created.

      3. Click Apply Proxy.

        Applying proxy enables the SRX device and Juniper ATP Cloud to communicate through the proxy server.

    Table 1: Fields on the Create Proxy Profile Page

    Field

    Action

    Profile Name

    Enter a name for the proxy profile.

    Connection Type

    Select the connection type server from the list that proxy profile uses:

    • Server IP—Enter the IP address of the proxy server.

    • Host Name—Enter the name of the proxy server.

    Port Number

    Select a port number for the proxy profile. Range is 0 to 65535.

  2. Enroll your device to Juniper ATP Cloud:
    1. Click Enroll.

      The ATP Enrollment page appears.

      Note

      If there are any existing configuration changes, a message appears for you to commit the changes and then to proceed with the enrollment process.

    2. Complete the configuration by using the guidelines in Table 2.

    3. Click OK.

      The SRX Series device enrollment progress, successful message, or any errors will be shown at the end of the ATP Enrollment page.

      Note
      • A new realm is created if you have enabled Create New Realm and then the SRX device is enrolled to Juniper ATP Cloud. If there is any existing enrollment for the same SRX device, CLI sends the data to Juniper ATP Cloud portal to do the duplicate validation during the enrollment process. You cannot check for the duplicate validation through J-Web.

      • Click Diagnostics to troubleshoot any enrollment errors.

    Table 2: Fields on the ATP Enrollment Page

    Field

    Description

    Create New Realm

    By default, this option is disabled if you have a Juniper ATP Cloud account with an associated license.

    Enable this option to add a new realm if you do not have a Juniper ATP Cloud account with an associated license.

    Location

    Select a region of the world from the list.

    Email

    Enter your E-mail address.

    Password

    Enter a unique string at least eight characters long. Include both uppercase and lowercase letters, at least one number, and at least one special character; no spaces are allowed, and you cannot use the same sequence of characters that are in your e-mail address.

    Confirm Password

    Reenter the password.

    Company Name

    Enter a company name to enroll into the realm. A company name can only contain alphanumeric characters, special characters (underscore and dash).

    Realm

    Enter a name for the security realm. This should be a name that is meaningful to your organization. A realm name can contain only alphanumeric characters and the dash symbol. Once created, this name cannot be changed.