Add a Destination NAT Pool

You are here: Network > NAT > Destination.

To add a Destination NAT Pool:

Click the add icon (+) on the upper right side of the Destination page.
The Add Rule Set page appears.
Complete the configuration according to the guidelines provided in Table 1.
Click OK to save the changes. If you want to discard your changes, click Cancel.

Table 1 describes the fields on the Add Rule Set Page.

Table 1: Fields on the Add Rule Set Page

Field	Action
Destination Rule Set
Add Rule Set
Rule Set Name	Specifies the name of the rule set. Enter the rule set name.
Rule Set Description	Specifies a description for the rule set. Enter a description for the rule set.
From	Specifies the filter options. Select an option: Routing Instance Zone Interface Select the routing instances/zones/interfaces in the Available column and the use the right arrow to move them to the Selected column.
Add Rule
Rule Name	Specifies the name of the rule. Enter the rule name.
Rule Description	Specifies a description for the rule. Enter a description for the rule.
Match
Source Address	Specifies the source IP address. The options available are: Available—Specifies the available source addresses. Selected—Specifies the selected source addresses. Search and select the source addresses in the Available column and the use the right arrow to move them to the Selected column. You can also enter a source address in the New text box in the Selected column and click Add to add the source address to the lower pane of the Selected column.
Destination Address	Enter the destination IP address.
Port	Enter the destination port number.
IP Protocol	Specifies the IP protocol for the destination NAT rule. Enter the protocol name in the text box and click Add to add the protocol to the IP Protocol column.
Actions	Specifies the actions for the destination NAT pool. Select an option: No Destination NAT. Do Destination NAT With Pool.
Do Destination NAT With Pool
Add New Pool	Specifies the add option for the Do Destination NAT With Pool option. Click Add New Pool.
Add Destination Pool
Pool Name	Enter the name of the destination pool.
Pool Description	Enter a description for the destination pool.
Routing Instance	Select an option.
Pool Addresses and Port
Address/Port	Enter the destination pool address.
Port	Enter the destination pool port number.
Address Range	Enter the destination pool address range.
Destination NAT Pool
Add Destination Pool
Pool Name	Enter the destination pool name.
Pool Description	Enter a description for the destination pool.
Routing Instance	Specifies the routing instance available. Select an option.
Pool Addresses and Port
Address/Port	Enter the destination pool address.
Port	Enter the destination pool port number.
Address Range	Enter the destination pool address range.

Add a Destination NAT Pool

Related Documentation