Edit an IPsec VPN
You are here: VPN > IPsec VPN.
To edit IPsec VPN:
When the IKE status is up and if you edit the IPsec VPN, the topology diagram is shown in green.
All local gateway protected networks will form traffic selectors with all remote gateway protected networks and vice-versa.
- Select an existing IPsec VPN configuration that you want to edit on the IPsec VPN page.
- Click the pencil icon available on the upper right-side
of the page.
The Edit IPsec VPN page appears with editable fields. You can modify any previous changes done.
- Click OK to save the changes. If you want to discard your changes, click Cancel.
During edit, Auto-create Firewall Policy and Gateway behind NAT options are not supported.
For Site-to-Site VPN, when the routing mode is Traffic Selector, the traffic selector creates the complete mesh between the local and remote addresses.