Monitor VPN—Phase II
You are here: Monitor > VPN > Phase II.
Use this page to view IPsec statistics and information related to IPsec security associations.
Table 1 describes the fields on the Phase II page.
Table 1: Fields on the Phase II Page
Indicates the duration of time after which you want the data on the page to be refreshed.
Click the refresh icon at the top right corner to display the fresh content.
Clears all the data on the display page.
Provides total number of bytes encrypted and decrypted by the local system across the IPsec tunnel.
Provides total number of packets encrypted and decrypted by the local system across the IPsec tunnel.
—Provides details of the IPsec statistics.
Displays the number of chassis cluster node.
Displays the values for the respective chassis cluster nodes.
Displays the chart for phase II statistics input or output bytes.
|IPsec Security Associations|
Index number of the SA.
IP address of the remote gateway/port.
Cryptography scheme used to secure exchanges between peers during the IKE Phase II negotiations:
Security parameter index (SPI) identifier. A SA is uniquely identified by an SPI. Each entry includes the name of the VPN, the remote gateway address, the SPIs for each direction, the encryption and authentication algorithms, and keys. The peer gateways each have two SAs, one resulting from each of the two phases of negotiation: Phase I and Phase II.
The lifetime of the SA, after which it expires, expressed either in seconds or kilobytes.
Specifies if VPN-Liveliness Monitoring has been enabled/disabled. Enabled - ' U ', Disabled- '—'
Specifies the root system.