Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Add an HA Cluster Interface

You are here: Device Administration > Cluster Configuration.

Procedure

To add an HA cluster interface:

  1. Click + on the upper right side of the Cluster Configuration page.

    The Add HA Cluster Interface page appears.

  2. Complete the configuration according to the guidelines provided in Table 118.
  3. Click OK to save the changes. If you want to discard your changes, click Cancel.

Table 118: Fields on the Add HA Cluster Interface Page

Field

Action

Fabric Link
Fabric Link 0 (fab0)

Interface

Enter the interface IP address for fabric link 0 and click + to add it.

Select an existing interface and click X to delete the interface.

Fabric Link 1 (fab1)

Interface

Enter the interface IP address for fabric link 1 and click + to add it.

Select an existing interface and click X to delete the interface.

Redundant Ethernet

Interface

Enter the logical interface. This specifies a logical interface consisting of two physical Ethernet interfaces, one on each chassis.

IP

Enter redundant Ethernet IP address.

Redundancy Group

Select one of the redundancy group from the list. Else, enter a redundancy group.

lacp

Select an option from list:

  • active—Initiate transmission of LACP packets.

  • passive—Respond to LACP packets.

periodic

Select an option from list for periodic transmission of LACP packets. The options are fast or slow.

+

Click + to add the redundant Ethernet configuration.

X

Select one or more existing redundant Ethernet configurations and click X to delete it.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit