Help Center User GuideGetting Started
User Guide
Getting Started

Add a Local Auth Entry

You are here: Security Services > Firewall Authentication > Local Authentication.


To add a local auth entry:

  1. Click the add icon (+) on the upper right side of the Local Auth page.

    The Add Local Auth Entry page appears.

  2. Complete the configuration according to the guidelines provided in Table 320.
  3. Click OK to save the changes. If you want to discard your changes, click Cancel.

Table 320: Fields on the Add Local Auth Page



IP Address

Enter an IP address for the local authentication.

User Name

Enter a username for the local authentication.

Role List

Enter roles for the local authentication entry. Enter the role and click + to add a role.

To delete a role, select the role and click the delete (X) icon.

To edit a role, hover over the role name and click the pencil icon.

Note: You can configure only maximum of 200 roles for a local authentication entry.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      

Additional Comments

800 characters remaining

May we contact you if necessary?


Need product assistance? Contact Juniper Support