Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

About the Assign to Interfaces Page

You are here: You are here: Network > Firewall Filters > Assign To Interfaces.

Use this page to configure interface for firewall filters.

Field Descriptions

Table 194 describes the fields on the Assign Interfaces page.

Table 194: Fields on the Assign Interfaces Page

Field

Description

Logical Interface Name

Displays the logical interfaces on a router. Allows you to apply IPv4 and IPv6 firewall filters to packets received on the interface and packets transmitted from the interface.

The options available are:

  • Input firewall filter:

    • IPv4 Input Filter—Enter the name of IPv4 filter applied to received packets.

    • IPv6 Input Filter—Enter the name of IPv6 filter applied to received packets.

  • Output firewall filter:

    • IPv4 Output Filter—Enter the name of IPv4 filter applied to transmitted packets.

    • IPv6 Output Filter—Enter the name of IPv6 filter applied to transmitted packets.

Click OK to save the changes.

Link State

Displays the status of the logical interface.

Input Firewall Filters

Displays the input firewall filter applied on an interface. This filter evaluates all packets received on the interface.

Output Firewall Filters

Displays the output firewall filter applied on an interface. This filter evaluates all packets transmitted from the interface.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit