Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Monitor RSVP Interfaces

You are here: Monitor > MPLS > RSVP Interfaces.

Use this page to view information about interfaces on which RSVP is enabled, including the interface name, total bandwidth through the interface.

Table 71 describes the fields on the RSVP Interfaces page.

Table 71: Fields on the RSVP Interfaces Page

Field

Description

RSVP Interface

Number of interfaces on which RSVP is active. Each interface has one line of output.

Interface

Name of the interface.

State

State of the interface:

  • Disabled—No traffic engineering information is displayed.

  • Down—The interface is not operational.

  • Enabled—Displays traffic engineering information.

  • Up—The interface is operational.

Active resv

Number of reservations that are actively reserving bandwidth on the interface.

Subscription

User-configured subscription factor.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit