Help Center User GuideGetting Started
User Guide
Getting Started

Monitor Classifiers

You are here: Monitor > Class of Service > Classifiers.

Use this page to display the mapping of incoming CoS value to forwarding class and loss priority.

Table 61 describes the fields on the Classifiers page.

Table 61: Fields on the Classifiers Page



Classifier Name

Name of a classifier.

To display classifier assignments, click the plus sign (+).

CoS Value Type

The classifiers are displayed by type:

  • dscp—All classifiers of the DSCP type.

  • dscp ipv6—All classifiers of the DSCP IPv6 type.

  • exp—All classifiers of the MPLS EXP type.

  • ieee-802.1—All classifiers of the IEEE 802.1 type.

  • inet-precedence—All classifiers of the IP precedence type.


Internal index of the classifier.

Incoming CoS Value

CoS value of the incoming packets, in bits. These values are used for classification.

Assign to Forwarding Class

Forwarding class that the classifier assigns to an incoming packet. This class affects the forwarding and scheduling policies that are applied to the packet as it transits the device.

Assign to Loss Priority

Loss priority value that the classifier assigns to the incoming packet based on its CoS value.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      

Additional Comments

800 characters remaining

May we contact you if necessary?


Need product assistance? Contact Juniper Support