Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Monitor Flow Session

You are here: Monitor > Flow Session.

Use this page to view flow session information of the respective session.

Table 98 describes the fields on the Flow Session page.

Table 98: Fields on the Flow Session Page

Field

Description

Flow Session Search

—Provides the option to search sessions.

Application

Displays the application name for the session summary.

Protocol

Provides the option to enter protocol details.

Source IP/Prefix

Enter the IP address of the authentication source.

Dest IP/Prefix

Enter the IP address of the authentication destination.

Search

Enables you to search for the flow session after all details are entered.

Reset

Enables you to go back to the default configuration.

Advanced

Provides you advanced options to search for Flow sessions.

Enter the below details:

  • Application—Displays the application name for the session summary.

  • Source IP/ Prefix—Enter the IP address of the authentication source.

  • Source Port—Enter the specified source port.

  • Protocol—Provides the options to enter protocol details.

  • AppFW Rule Set—Displays the number of application firewall rule set configurations.

  • Application Group—Enables you to collect application group statistics.

  • Interface—Select an interface from the list.

  • Dest IP/ Prefix—Enter the IP address of the authentication destination.

  • Dest Port—Enter the specified destination port

  • Family—Select an option from the list.

  • Application Firewall—Check the box to permit, reject, or deny traffic based on the application of the traffic.

  • Application QoS—displays traffic based on application type and limits the amount of bandwidth an application can consume.

    Note: This option is available only with SRX4000 and SRX5000 line of devices.

Flow Session Summary

—Provides a summary of the all the options selected in the Flow Gate.

Clear

Provides the option to clear the session details statistics.

Click Clear to clear the details session statistics.

Flow Session Information

Session ID

Displays the number that identifies the session. Use this ID to get more information about the session.

Policy

Displays the policy that permitted the traffic.

TimeOut

Displays the idle timeout after which the session expires.

Status

Displays the status of the session.

Source IP/Port

Enter the IP address of the authentication source.

Protocol

Provides the option to enter protocol details.

Enter the protocol details.

InComing IF

Displays the incoming flow (source and destination IP addresses, application protocol, and interface).

Outgoing IF

Displays the reverse flow (source and destination IP addresses, application protocol, and interface).

AppSecure Detail

Displays list of all enabled and disabled application signatures and existing application rule sets on the device.

Refresh

Click the refresh icon at the top right corner to display the fresh content.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit