Add a Static Route
You are here: Network > Routing > Static Routing.
To add a static route:
- Click the add icon (+) on the upper right side
of the Static Routing page.
The Add Static Route page appears.
- Complete the configuration according to the guidelines provided in Table 1.
- Click OK to save the changes. If you want to
discard your changes, click Cancel instead.
If you click OK, a new static route is added with the provided configuration.
Table 1: Fields on the Add Static Route Page
Select the routing instance from the list.
The selected destination routing instance that points to the routing table containing the tunnel destination address.
Note: If you log in as a tenant user, routing instance is not displayed as tenant context supports only one routing instance.
Click the IPv4 button.
Enter the static route IPv4 address.
Enter the subnet mask. For example, 24 bits represents the 255.255.255.0 address.
Click the IPv6 button.
Enter the static route IPv6 address.
Enter the prefix for IPv6 address.
Displays the next-hop address created.
Click any one of the following