Monitor Static NAT

You are here: Monitor > NAT > Static NAT.

Use this page to view information related to NAT rules.

Table 1 describes the fields on the Static NAT page.

Table 1: Fields on the Static NAT Page

Field	Description
Rule-set Name	Name of the rule set. Select all rule sets or a specific rule set to display from the list.
Total rules	Number of rules configured.
Refresh	Indicates the duration of time after which you want the data on the page to be refreshed.
Refresh Interval	Click the refresh icon at the top right corner to display the fresh content.
ID	Rule ID number.
Position	Position of the rule that indicates the order in which it applies to traffic.
Name	Name of the rule.
Ruleset Name	Name of the rule set.
From	Name of the routing instance/interface/zone from which the packet comes.
Source addresses.	Source IP addresses.
Source ports	Source port numbers.
Destination addresses	Destination IP address and subnet mask.
Destination ports	Destination port numbers.
Host addresses	Name of the host addresses.
Host ports	Host port numbers.
Netmask	Subnet IP address.
Host routing instance	Name of the routing instance from which the packet comes.
Alarm threshold	Utilization alarm threshold.
Sessions (Succ/ Failed/ Current)	Successful, failed, and current sessions. Succ—Number of successful session installations after the NAT rule is matched. Failed—Number of unsuccessful session installations after the NAT rule is matched. Current—Number of sessions that reference the specified rule.
Translation hits	Number of times a translation in the translation table is used for a static NAT rule.
Top 10 Translation Hits Graph	Displays the graph of top 10 translation hits.