About the Source Page
You are here: Network > NAT > Source.
Use this page to configure source NAT.
Tasks You Can Perform
You can perform the following tasks from this page:
Add a global settings. See Global Settings.
Add a source rule set. See Add a Source Rule Set.
Edit a source rule set See Edit a Source Rule Set.
Delete a source rule set. See Delete Source Rule Set.
Add a source NAT pool. See Add a Source NAT Pool.
Edit a source NAT pool. See Edit a Source NAT Pool.
Delete a source NAT pool. See Delete Source NAT Pool.
Launch NAT wizard. To do this, click Launch Wizard option at the right side of the page. The NAT wizard leads you through the basic required steps to configure NAT for the SRX Series security device.
Field Descriptions
Table 1 describes the fields on the Source Page.
Table 1: Fields on the Source Page.
Field | Description |
|---|---|
| Source NAT Rule Set | |
From | Displays the source NAT sort options from which the packets flow. The options available are:
|
To | Displays the source NAT sort options to which the packets flow. The options available are:
|
Filter | Displays the filter option. |
Name | Displays the name of the source NAT rule set. |
From | Displays the name of the routing instance, zone, or interface from which the packets flow. |
To | Displays the name of the routing instance, zone, or interface to which the packets flow. |
Rule | Displays the name of the rule in the selected source NAT rule set. |
Description | Displays a description of the source NAT rule set. |
| Rules in Selected Rule-Set | |
Rule Name | Displays the name of the rule in the selected source NAT rule set. |
Source Addresses | Displays the match source address. |
Source Ports | Displays the match source ports. |
Destination Addresses | Displays the match destination address. |
Destination Ports | Displays the match destination port. |
IP Protocol | Displays the match IP protocol. |
Action | Displays the action of the rule. |
Persistent | Displays the persistent NAT address in the source NAT pool |
Upper Threshold | Displays the upper threshold value at which an SNMP trap is triggered. |
Lower Threshold | Displays the lower threshold value at which an SNMP trap is triggered. |
Description | Displays the description of the rule. |
| Source NAT Pool | |
Name | Displays the name of the source NAT pool. |
Address | Displays the IP address of the source NAT pool. |
Port | Displays the port address of the source NAT pool. |
Description | Displays the description of the source NAT pool. |
Upper Threshold | Displays the upper threshold at which an SNMP trap is triggered. Range: 50 through 100. |
Lower Threshold | Displays the lower threshold at which an SNMP trap is triggered. Range: 40 through 100. |