About the Destination Page

You are here: Network > NAT > Destination.

Use this page to add, edit, or delete destination NAT configurations.

Tasks You Can Perform

You can perform the following tasks from this page:

Add a Destination Rule Set. See Add a Destination Rule Set.
Add a Destination Rule Set. See Edit a Destination Rule Set.
Delete a Destination Rule Set. See Delete Destination Rule Set.
Add a Destination NAT Pool. See Add a Destination NAT Pool.
Edit a Destination NAT Pool. See Edit a Destination NAT Pool.
Delete a Destination NAT Pool. See Delete Destination NAT Pool.
Launch NAT wizard. To do this, click Launch Wizard option at the right side of the page. The NAT wizard leads you through the basic required steps to configure NAT for the SRX Series security device.

Table 1 describes the fields on the Destination Page.

Table 1: Fields on the Destination Page.

Field	Description
Destination NAT Rule Set
From	Displays the destination NAT sort options from which the packets flow. The options available are: Routing Instance Zone Interface
To	Displays the destination NAT sort options to which the packets flow. The options available are: Routing Instance Zone Interface
Filter	Displays the filter option.
Name	Displays the name of the destination NAT rule set.
From	Displays the name of the routing instance/zone/interface from which the packets flow.
Rule	Displays the name of the rule in the selected destination NAT rule set.
Description	Displays a description of the destination NAT rule set.
Rules in Selected Rule-Set
Rule Name	Displays the name of the rule in the selected destination NAT rule set.
Match Source	Displays the match source address.
Match Destination	Displays the match destination address.
Match IP Protocol	Displays the match IP protocol.
Match Destination Port	Displays the match destination port.
Action	Displays the action of the rule in the selected rule set.
Description	Displays a description of the rule in the selected destination NAT rule set.
Destination NAT Pool
Name	Displays the name of the destination NAT pool.
Address	Displays the IP address of the destination NAT pool.
Port	Displays the port address of the destination NAT pool.
Description	Displays a description of the destination NAT pool.