Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Link Aggregation Global Settings

You are here: Configure > Interfaces > Link Aggregation.

Procedure

To add link aggregation global settings:

  1. Complete the configuration according to the guidelines provided in Table 128.

Table 128: Fields on the Link Aggregation Global Settings page

Field

Action

Global Settings

Device Count

Enter the device count.

The range is 1 through 28.

Advanced Settings

Note: This option is not available for SRX5000 line of devices.

LACP Configuration

Specifies global Link Aggregation Control Protocol configuration.

System Priority

Click the arrow button to select the priority level that you want to associate with the LAG.

Link Protection

Select the option to protect the link.

Note: You can configure only two member links for an aggregated Ethernet interface, that is, one active and one standby.

Non-Revertive

Enable or disable the option to not to choose even if a higher priority link is available.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit