Help Center User GuideGetting Started
User Guide
Getting Started

Global Settings

You are here: Configure > Security Services > VPN > Dynamic VPN.


To add global settings:

  1. Click Global Settings on the upper right side of the Resource Profiles page.

    The DVPN - Global Settings page appears.

  2. Complete the configuration according to the guidelines provided in Table 278.
  3. Click OK to save the changes. If you want to discard your changes, click Cancel.

Table 278: Fields on the Global Settings page



Access Profile

Select an access profile from the list to use for Extended Authentication for remote users trying to download the Access Manager.

Address Profile Settings

Address Pool

Select an address pool from the list


Click + to add a new address pool.

The New Address Pool page appears.

New Address Pool


Enter a name for address pool.

Network Address

Enter the network prefix for the address pool for IPv4 or IPv6 addresses.

Address Ranges


Click + to add the address range for DVPN.

Address Range Name

Enter an address range name.

Lower Limit

Enter the lower boundary for the IPv4 or IPv6 address range.

High Limit

Enter the upper boundary for the IPv4 or IPv6 address range.


Click X to delete the address ranges of DVPN.

XAUTH Attributes

Primary DNS Sever

Enter the primary DNS IP address.

Secondary DNS Sever

Enter the secondary DNS IP address.

Primary WINS Sever

Enter the primary WINS IP address.

Secondary WINS Sever

Enter the secondary WINS IP address.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      

Additional Comments

800 characters remaining

May we contact you if necessary?


Need product assistance? Contact Juniper Support