Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Add a Protocol Command List

You are here: Configure > Security Services > UTM > Custom Objects.

Procedure

To add a protocol command list:

  1. Click the Protocol Command List tab.
  2. Click the add icon (+) on the upper right side of the Protocol Command List tab.

    The Add Protocol Command List page appears.

  3. Complete the configuration according to the guidelines provided in Table 241.
  4. Click OK to save the changes. If you want to discard your changes, click Cancel.

Table 241: Fields on the Add Protocol Command List Page

Field

Action

Name

Enter a name for the protocol command list.

You can use a string beginning with a letter or underscore and consisting of alphanumeric characters, special characters such as dashes and underscores. The maximum length is 29 characters.

Value

Procedure

To add a protocol command value:

  1. Click +.
  2. Enter the protocol command value in the Value List.
  3. Click the tick mark.

If you want to delete any protocol command values, select the value and click the delete icon.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit