Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

About the Dynamic VPN Page

You are here: Configure > Security Services > VPN > Dynamic VPN.

You can view and add, edit, or delete dynamic VPN global configuration options.

Note This menu is available only for SRX300 line of devices and SRX550M devices.

Tasks You Can Perform

You can perform the following tasks from this page:

Field Descriptions

Table 277 describes the fields on the Dynamic VPN page.

Table 277: Fields on the Dynamic VPN Page

Field

Description

Access Profile

Select a previously created access profile from the list displayed in Global Settings.

Specify the access profile to use for Extended Authentication for remote users trying to download the Access Manager.

Note: This Access Profile option does not control authentication for VPN sessions. For more information, see Add a Gateway and Add a VPN.

Client VPNs

Create a client configuration for the dynamic VPN feature.

Name

Enter a name for dynamic VPN.

User

Enter an user name. Specifies the list of users who can use this client configuration.

IP Address

Enter an IP address and netmask for the users.

IPsec VPN

Select a previously configured IKE AutoKey configuration from the list.

Remote Protected Resources

Enter an IP address and netmask of a resource behind the firewall. Traffic to the specified resource will go through the VPN tunnel and therefore will be protected by the firewall’s security policies.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit