Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

About the Zone Addresses Page

You are here: Configure > Security Services > Security Policy > Objects > Zone Addresses.

Use this page to configure zone address or address set.

Tasks You Can Perform

You can perform the following tasks from this page:

Field Descriptions

Table 193 describes the fields on the Zone Addresses page.

Table 193: Fields on the Zone Addresses Page

Field

Description

Addresses

Zone

Displays the zone name to which the address is applied.

Name

Displays the address name.

Type

Displays the selected address type.

IP Address

Displays the IP address of the zone address.

Description

Displays the description of the address.

Address Sets

Zone

Displays the zone name to which the address set is applied.

Name

Displays the address sets name.

Type

Displays the selected address type.

Address List

Displays the preexisting addresses that should be included from the address set.

Address Set List

Displays the preexisting addresses that should be included from the list.

Description

Displays the description of the address set.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit