Monitor Wireless LAN
You are here: Monitor > Wireless LAN.
Use this page to view wireless access points details.
Starting in Junos OS Release 20.1R1, J-Web supports SRX380 devices. You can monitor the SRX380 device supported Wi–Fi Mini-Physical Interface Modules (Mini-PIMs).
Table 1 describes the fields on the Wireless LAN page.
Table 1: Fields on the Wireless LAN Page
|Access Point Details|
Displays the following names:
Displays the values for the respective names.
Displays the virtual access point with which the client is associated. For example, wlan0vap2 means the client is associated with VAP 2 on radio 1.
wlan0 means the client is associated with VAP 0 on radio 1.
wlan1 means the client is associated with VAP 0 on radio 2.
Client MAC Address
Displays the MAC address of the associated wireless client.
Displays the underlying IEEE 802.11 authentication status, if the virtual access point security mode is set to none or static WEP.
This status does not show IEEE 802.1x authentication or association status. If the virtual access point security mode is set to 802.1x or WPA, it is possible for a client association to be shown as being authenticated when it has actually not been authenticated through the second layer of security.
Displays the following information:
Displays the number of packets received from the wireless clients and transmitted from the access point to the wireless client.
Displays the number of bytes received from the wireless clients and transmitted from the access point to the wireless client.
|Neighboring Access Points|
Displays the MAC address of the neighbor access point.
Displays the security status on the neighbor access point:
Displays if Wi-Fi Protected Access (WPA) security is on or off on the neighbor access point.
Displays the IEEE 802.11 mode being used on the neighbor access point:
Displays the channel on which the neighbor access point is currently broadcasting.
Displays if the service set identifier that identifies the WLAN that the neighbor access point is broadcasting.
|Virtual Access Points Details|
Displays the name of the virtual access points.
Displays the details of the virtual access points. For example, SSID, VLAN ID, upload limit and so on.