Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Add a Protocol Command List

 

You are here: Configure > Security Services > UTM > Custom Objects.

To add a protocol command list:

  1. Click the Protocol Command List tab.
  2. Click the add icon (+) on the upper right side of the Protocol Command List tab.

    The Add Protocol Command List page appears.

  3. Complete the configuration according to the guidelines provided in Table 1.
  4. Click OK to save the changes. If you want to discard your changes, click Cancel.

Table 1: Fields on the Add Protocol Command List Page

Field

Action

Name

Enter a name for the protocol command list.

You can use a string beginning with a letter or underscore and consisting of alphanumeric characters, special characters such as dashes and underscores. The maximum length is 29 characters.

Value

To add a protocol command value:

  1. Click +.
  2. Enter the protocol command value in the Value List.
  3. Click the tick mark.

If you want to delete any protocol command values, select the value and click the delete icon.