Add an Address Pool
You are here: Configure > Security Objects > Address Pools.
To add an address pool:
- Click the add icon (+) on the upper right side
of the Address Pools page.
The Create Address Pool page appears.
- Complete the configuration according to the guidelines provided in Table 1.
- Click OK to save the changes. If you want to discard your changes, click Cancel.
Table 1: Fields on the Create Address Pool Page
Enter the address pool name.
Enter a IPv4 address for the address pool.
Primary DNS Server
Enter the primary-dns IPv4 address.
Secondary DNS Server
Enter the secondary-dns IPv4 address.
Primary WINS Server
Enter the primary-wins IPv4 address.
Secondary WINS Server
Enter the secondary-wins IPv4 address.
Click + to add a new address range for the address pool.
Enter a name for the IP address range.
Enter the lower limit of the address range.
Enter the upper limit of the address range.
Click the delete icon to delete the address range for the address pool.