Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Add an Address Book

You are here: Configure > Security Services > Security Policy > Objects > Global Addresses.

Procedure

To add an address book:

  1. Click the add icon (+) on the upper right side of the Global Addresses page.

    The Add Address Book page appears.

  2. Complete the configuration according to the guidelines provided in Table 196.
  3. Click OK to save the changes. If you want to discard your changes, click Cancel.

Table 196: Fields on the Global Addresses Page

Field

Action

Address Book Name

Enter a name for the address book.

Address Book Description

Enter a description for the address book.

Attach Zones

You can select more than one zone from the list for one address book.

Note: Ensure that each zone has only one address book attached to it. If there is more than one address book attached to a zone, you will get the following error when you commit the configuration.

Security zone must be unique in address books.

Addresses

+

Procedure

To add an address:

  1. Click + available at the upper right side of the Addresses table.

    The Add Address page appears.

  2. Enter the following details:
    • Address Name—Enter a name for the address.

    • Description—Enter a description for the address.

    • Address Type—Select one of the following address types from the list:

      • IP Address

      • Wildcard Address

      • Domain Name

      • Ranged Address

    • Value—Enter an address that matches the selected address type.

  3. Click OK to save the changes.

Edit

Procedure

To edit an address:

  1. Select an existing address and click the pencil icon available at the upper right side of the Addresses table.

    The Add Address page appears with editable fields.

  2. Click OK to save the changes.

Delete

Select an existing address and click the delete (X) icon available at the upper right side of the Addresses table to delete it.

Address Set

+

Procedure

To add an address set:

  1. Click + available at the upper right side of the Addresses table.

    The Add Address Set page appears.

  2. Enter the following details:
    • Address Set Name—Enter a name for the address set.

    • Description—Enter a description for the address set.

    • Address List—Select the address from the list in the Available column and then click the right arrow to move it to the Selected column.

      Specifies which of the preexisting addresses should be included or excluded from the address set.

    • Address Set List—Select the address sets from the list in the Available column and then click the right arrow to move it to the Selected column.

      Specifies which of the preexisting address sets should be included or excluded from the list.

  3. Click OK to save the changes.

Edit

Procedure

To edit an address set:

  1. Select an existing address and click the pencil icon available at the upper right side of the Address Set table.

    The Add Address Set page appears with editable fields.

  2. Click OK to save the changes.

Delete

Select an existing address set and click the delete (X) icon available at the upper right side of the Address Set table to delete it.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit