Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Add a Custom Application

You are here: Configure > Security Services > Security Policy > Objects > Services.

Procedure

To add a custom application:

  1. Click the Custom-Applications tab.
  2. Click the add icon (+) on the upper right side of the Services page.

    The Add an Application page appears.

  3. Complete the configuration according to the guidelines provided in Table 191.
  4. Click OK to save the changes. If you want to discard your changes, click Cancel.

Table 191: Fields on the Add an Application Page

Field

Action

Global

Application Name

Enter a custom application name.

Application Description

Enter a description for the custom application.

Application-protocol

Select a custom application protocol from the list.

Match IP protocol

Select a custom network protocol from the list.

Destination Port

Select a custom destination port identifier from the list.

Source Port

Select a custom source port identifier from the list.

Inactivity-timeout

Enter a value from 4 through 86400.

Specifies the length of time (in seconds) that the application is inactive before it times out.

RPC-program-number

Enter a remote procedure call value from 0 through 65535.

Match ICMP message code

Select an Internet Control Message Protocol (ICMP) message code value from the list.

Match ICMP message type

Select a Internet Control Message Protocol message type value from the list.

UUID

Enter a universal unique identifier (UUID).

Application Group

Select an option from the list.

Specifies the set to which this application belongs.

Terms

Add

Click +.

The Add new term page appears.

Term Name

Enter an application term name.

ALG

Select an option from the list.

Specifies the Application Layer Gateway (ALG) for the application protocol.

Match IP protocol

Select a network protocol from the list.

Destination Port

Enter the destination port identifier.

Source Port

Specifies the source port identifier.

Inactivity-timeout

Enter a value from 4 through 86400.

Specifies the length of time (in seconds) that the application is inactive before it times out.

RPC-program-number

Enter a remote procedure call value from 0 through 65535.

Match ICMP message code

Select a ICMP message code value from the list.

Match ICMP message type

Select a ICMP message type value from the list.

UUID

Select an option from the list.

Specifies the set to which this application belongs.

Edit

Select a term and click the pencil icon at the right corner of the table to modify the configuration.

Delete

Select a term and click the delete (X) icon at the right corner of the table to delete the selected term.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit