Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Add a Virtual Channel

You are here: Configure > Network > Class of Service > Virtual Channel Groups.

Note This menu is not available for SRX4000 line of devices and SRX5000 line of devices.

Procedure

To add a virtual channel to the virtual channel group:

  1. Click Add on the Virtual Channel page.

    The Virtual Channel Information page appears.

  2. Complete the configuration according to the guidelines provided in Table 170.
  3. Click OK to save the changes. If you want to discard your changes, click Cancel.

Table 170: Fields on the Virtual Channel Information Page

Field

Action

Virtual Channel Name

Select a predefined name from the list or enter a new virtual channel name.

Scheduler Map

Select a scheduler map from the list.

Specifies a predefined scheduler map to assign to a virtual channel. The scheduler maps associate schedulers with forwarding classes.

Shaping Rate

Enter the shaping rate for a virtual channel.

Configuring a shaping rate is optional. If no shaping rate is configured, a virtual channel without a shaper can use the full logical interface bandwidth. The options available are:

Select an option from the list:

  • Unconfigured—Select the option for no shaping rate.

  • Absolute Rate—Configures a shaping rate as an absolute number of bits per second.

    Range: 3200 through 320000000000.

  • Percent—Configures a shaping rate as a percentage.

    Range: 0 through 100.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit