Add a Rewrite Rule
You are here: Configure > Network > Class of Service > Rewrite Rules.
Procedure
To add a rule configuration:
- Click the add icon (+) available on the right
side of the Forwarding Class page.
The Add Rewrite Rule page appears.
- Complete the configuration according to the guidelines
provided in Table 162.
- Click OK to save the changes. If you want to
discard your changes, click Cancel.
Table 162: Fields on
the Add Rewrite Rule Page
Field | Action |
|---|
Rewrite rule name | Enter the name of a defined rewrite rule. |
Rewrite rule type | Select a rewrite rule type from the list. dscp—Defines the Differentiated Services
code point rewrite rule. ieee-802.1—Defines the IEEE-802.1 rewrite
rule. inet-precedence—Defines the precedence
rewrite rule for IPv4. exp—Defines the MPLS EXP rewrite rule. Note:
This option is not available on SRX4000 lines of devices
and SRX5000 lines of devices. dscp-ipv6—Defines the Differentiated
Services code point rewrite rule for IPv6. Note:
This option is not available on SRX4000 lines of devices. ieee-802.1ad—Defines the IEEE-802.1ad
rewrite rule. Note:
This option is not available on SRX4000 lines of devices. frame-relay-de—Defines the frame relay
discard eligible bit rewrite rule. Note:
This option is not available on SRX4000 lines of devices
and SRX5000 lines of devices.
|
Code point mapping | Specifies the code point mapping created. Click one: Add—Click + to add a code
point mapping. Edit—Click pencil icon to edit the selected
code point mapping. Delete—Deletes the code point mapping.
|
Egress/Outgoing Code point | Select a CoS value and alias from the list. |
Forwarding class | Select the forwarding class of the rewrite rule from
the list. |
Loss priority | Select the loss priority of the rewrite rule from the
list. |
Related Documentation
Help us to improve. Rate this article.
Feedback Received. Thank You!